top of page


The CDT3-MK3 is a result of years of experience in making. It is THE ultimate CD Transport with Jay's Audio Tuned Philips CDPro2-LF Mechanism

THE Flagship Top-loader CD Transport


Equipped with Philips CDPRO2 LF, proprietary tuned by Jay's Audio chief, Jay Ho. 

The CDPRO2 module is mounted to massive aluminium plate which are in turn affixed with damped mountings for complete mechanical isolation.

Jay stock piled hundred of CDPRO2 LF. Critical audiophiles who demand longevity of the CDT are well covered with the spare parts when needed.


In digital audio, the quality of the crystal plays a big part in the audio quality. 

CDT3-MK3 is equipped with low noise, low phase noise, low jitter, ultra precision Oven Controlled Crystal Oscillator.

The residual jitter at <1ps is undetectable with the test equipment on the market. 

Master Clock I.O.

CDT3 can be synchronised with downstream equipment (DAC) via its 10MHz clock I/O.


With external clock connected, it bypasses the internal OCXO, the CDT3 is slaved to the Master Clock. 

Mechanical Isolation

Tremendous amount of attentions to vibration control were implemented.


Milled high grade aluminium chassis, coupled with milled internal vibration control aluminium structure, the CDT3 is built like a tank that spin the silver Redbook CDT with negligible g-force.

Exceptional Performance

The result of all the technologies accumulation and experiences of years in making the Hi-End CD transport


Galvanic Isolation

Scientific Digital Transformer

Super Regulator

Discrete Linear Power Supply


Jay's Audio Tuned CDPRO2 LF Laser


Oven Controlled Crystal Oscilator 


Design Highlight:

  • Jay's Audio Tuned CDPRO2-LF Mechanism 

  • Schurter IEC Inlet

  • Improved Noise Filter with 110v/230v switching

  • Talema Encapsulated Transformers

  • Multistage Super Regulator with Boutique Grade Caps

  • Neutrik XLR

  • Oven Controlled Crystal Oscillator OCXO

  • i2s LVDS Output 

  • Scientific Digital Output Isolation Transformer

  • Native/Upsampling 44.1kHz / 176.4kHz Configurable via Toggle Switch


Supported Formats:

  • Redbook CD, CDR, CDR/W only**



* The dimmeable display may turn on where there is a signal to trigger it to turn on; the signal can be a remote control signal, or an internal CDPRO2-LF processor signal. It is normal and shall not be viewed as a defect. 


** Redbook CD transport only. Doesn't support HDCD/SACD/DSD

Digital Output: COAX (RCA/BNC) 2v @ 75ohm ; AES/EBU 5V @110ohm

I2S Output: HDMI i2s LVDS, RJ45 i2s LVCMOS

Sampling Rate: 44.1kHz, 176.4kHz

Clock-Output: 10MHz / 5 V p-p / 50 Ω

Clock-Input: 10MHz / 0.3 – 5 V p-p / 50 to 75 Ω


AC Power: 110V/230V, 50-60Hz

Dimension: 450mm x 380mm x 150mm

Weight: 22KG

Warranty: 12 months

bottom of page